Configuring Resilient Per-Ce Label Allocation Mode; Configuring Resilient Per-Ce Label Allocation Mode Under Vrf Address Family - Cisco ASR 9000 Series Routing Configuration Manual

Implementing BGP
Command or Action
Step 9
show svd role
Example:
RP/0/RSP0/CPU0:router#show svd role
Codes: (C) : user Configured role
Node Name
--------------------------------------------------------------------
0/RSP0/CPU0
0/0/CPU0
0/1/CPU0

Configuring Resilient Per-CE Label Allocation Mode

Configuring Resilient Per-CE Label Allocation Mode Under VRF Address Family

Perform this task to configure resilient per-ce label allocation mode under VRF address family.
Resilient per-CE 6PE label allocation is not supported on CRS-1 and CRS-3 routers, but supported only
Note
on CRS-X routers.
SUMMARY STEPS
1. configure
2. router bgpas-number
3. vrfvrf-instance
4. address-family {ipv4 | ipv6} unicast
5. label mode per-ce
6. Do one of the following:
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)#
IPv4 Role
Standard
Standard
Standard
• end
• commit
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
Configuring Resilient Per-CE Label Allocation Mode
IPv6 Role
Standard
Standard
Standard
Purpose
Verifies if selective VRF download
is inactive by confirming that svd
roles are "standard" for the line
cards that have VRF interfaces on
them.
181