Delta's Plc - A Demonstration Of As300 - Delta CMM-EIP02 Applications Manual

5.1.1 Delta's PLC – A Demonstration of AS300
AS332P-A
Device MS300
CMM-EIP02
COMMGR
DCISoft
Software
ISPSoft
EIP Builder
1. Connect your computer, AS332P-A and option card CMM-EIP03 using Ethernet. Then, build
up either a star typology or linear typology. For how to create a typology, see Section 3.9.1
<Single-port Communication Device>. If the option card is single port, build up a star
typology.
2. Set the IP address of option card and drive parameters according to the instructions in
Chapter 4. Then, use DCISoft software to change the IP address of CMM-EIP02 to
192.168.1.105.
3. Open COMMGR software, and click Add to select Ethernet as communication type. Select
the correct Ethernet card, and then click Search to scan all devices. Make sure that AS332P
and CMM-EIP02 are listed in the scanned results. Then, press OK button to successfully add
device channel into COMMGR for ISPSoft connection.
Option Card Application Manual
192.168.1.5
192.168.1.105
Above V1.11
Above V1.23
Above V3.10
Above V1.07
VFD EtherNet/IP Option Card
48