Identity Object (Class Id: 01 Hex) - Omron K6PM-TH User Manual

5 Monitoring and Setting with the EtherNet/IP Communications
5-3-7

Identity Object (Class ID: 01 hex)

This object reads the Main Unit software reset and the Main Unit identification information, and also
reads the state of the built-in EtherNet/IP port.
Service Codes
Service
Service name
code
01 hex Get_Attributes_All
0E hex Get_Attribute_Single Reads the value of the specified attribute.
05 hex Reset
Class ID
Specify 01 hex.
Instance ID
Specify 01 hex.
Attribute ID
The attribute ID specifies the information to read.
 Class Attribute ID
The class attribute ID specifies the attribute of the object class.
Attribute ID
01 hex Revision
5 - 22
Reads the values of all attributes.
Performs software reset of the Main Unit.
Execute this service code to perform software
reset of the Main Unit when you change the
parameter settings and want to apply the
changed parameters.
Parameter name
Revision of the object
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Description
Description Attribute
Read
Supported services
Classes Instances
Supported Supported
Supported Supported
Not supported Supported
Data
Default
Data type
value
UINT 0001 hex