Plc Detection And Setup Functions - Keysight B2980B Series User Manual

Function Details

PLC Detection and Setup Functions

PLC Detection and Setup Functions

B2980 can automatically detect the power line frequency when B2980 is turned
on. This is called a Power-on PCL Detection function. The frequency (50 Hz or 60
Hz) detected and set automatically can be checked by the function key displayed
by System Menu > System > PLC operations.
You can enable or disable this function using the Power-on PLC Detect field in the
System Start-up dialog box.
You can also perform the power line frequency detection as needed, or set 50 Hz
or 60 Hz to the PLC value forcibly. Use the function keys displayed by System
Menu > System > PLC operations.
244 Keysight B2980B User's Guide, Edition 1