Dell PowerConnect J-EX4200-24T Software Manual page 2383

CLI Quick To quickly configure VoIP, copy the following commands and paste them into the switch
Configuration terminal window:
[edit]
set vlans data-vlan vlan-id 77
set vlans voice-vlan vlan-id 99
set vlans data-vlan interface ge-0/0/2.0
set interfaces ge-0/0/2 unit 0 family ethernet-switching vlan members data-vlan
set interfaces ge-0/0/2 unit 0 family ethernet-switching port-mode access
set ethernet-switching-options voip interface ge-0/0/2.0 vlan voice-vlan
set ethernet-switching-options voip interface ge-0/0/2.0 forwarding-class assured-forwarding
set protocols lldp-med interface ge-0/0/2.0
set protocols dot1x authenticator authentication-profile-name auth-profile
set protocols dot1x authenticator static 00:04:f2:11:aa:a7
set protocols dot1x authenticator interface ge-0/0/2.0 supplicant multiple
Step-by-Step To configure VoIP without 802.1X:
Procedure
Configure the VLANs for voice and data:
1.
Associate the VLAN
2.
Configure the interface as an access interface, configure support for Ethernet
3.
switching, and add the
Configure VoIP on the interface and specify the
4.
to provide the most dependable class of service:
Configure LLDP-MED protocol support:
5.
Set the authentication profile (see "Configuring 802.1X Interface Settings (CLI
6.
Procedure)" on page 2331 and "Configuring 802.1X RADIUS Accounting (CLI
Procedure)" on page 2339):
Add the MAC address of the phone to the static MAC bypass list:
7.
Set the supplicant mode to multiple:
8.
[edit vlans]
user@switch# set data-vlan vlan-id 77
user@switch# set voice-vlan vlan-id 99
data-vlan
[edit vlans]
user@switch# set data-vlan interface ge-0/0/2.0
data-vlan
[edit interfaces]
user@switch# set ge-0/0/2 unit 0 family ethernet-switching vlan members data-vlan
user@switch# set ge-0/0/2 unit 0 family ethernet-switching port-mode access
[edit ethernet-switching-options]
user@switch# set voip interface ge-0/0/2.0 vlan voice-vlan
user@switch# set voip interface ge-0/0/2.0 forwarding-class assured-forwarding
[edit protocols]
user@switch# set lldp-med interface ge-0/0/2.0
[edit protocols]
set dot1x authenticator authentication-profile-name auth-profile
[edit protocols]
set dot1x authenticator static 00:04:f2:11:aa:a7
Chapter 82: Examples: Access Control Configuration
with the interface:
VLAN:
assured-forwarding
forwarding class
2311