Dell PowerConnect J-EX4200-24T Software Manual page 1521

Table 197: Terms Configuration Parameters (continued)
Field Function
Route Specifies the type of route.
AS Path Specifies the name of an AS path regular expression.
Community Specifies the name of one or more communities.
Destination tab
Family Specifies an address family protocol.
Routing Instance Specifies a routing instance.
RIB Specifies the name of a routing table.
Preference Specifies the individual preference value for the route.
Metric Specifies a metric value.
Interface Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP).
Protocol Specifies the name of the protocol from which the route was
learned or to which the route is being advertised.
Action tab
Action Specifies the action to take if the conditions match.
Default Action Specifies that any action that is intrinsic to the protocol is
overridden. This action is also nonterminating, so that various
policy terms can be evaluated before the policy is terminated.
Next Specifies the default control action if a match occurs, and there
are no further terms in the current routing policy.
Priority Specifies a priority for prefixes included in an OSPF import
policy. Prefixes learned through OSPF are installed in the
routing table based on the priority assigned to the prefixes.
BGP Origin Specifies the BGP origin attribute.
Chapter 71: Configuring Layer 3 Protocols
Your Action
Select .
External
Select the OSPF type from the list.
Click . Select the AS path from the list.
Add
Click Add . Select the community from the
list.
Select a value from the list.
Select a value from the list.
Select a value from the list.
Type a value.
Type a value.
To add an interface, select
Add >
. Select the interface from the
Interface
list.
To add an address, select Add > Address
Select the address from the list.
To delete an interface, select it and click
.
Remove
Click and select the protocol from
Add
the list.
To delete a protocol, select it and click
Remove .
Select a value from the list.
Select a value from the list.
Select a value from the list.
Select a value from the list.
Select a value from the list.
.
1449