Neighbor - Dell PowerConnect J-EX4200-24T Software Manual

neighbor

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
neighbor neighbor-name {
authentication-key password;
authentication-type type;
bfd-liveness-detection {
authentication {
algorithm algorithm-name;
key-chain key-chain-name;
loose-check;
}
detection-time {
threshold milliseconds;
}
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
transmit-interval {
threshold milliseconds;
minimum-interval milliseconds;
}
multiplier number;
version (0 | 1 | automatic);
}
(check-zero | no-check-zero);
import policy-name;
message-size number;
metric-in metric;
metric-out metric;
receive receive-options;
route-timeout seconds;
send send-options;
update-interval seconds;
}
[edit logical-systems logical-system-name protocols rip group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip group group-name],
[edit protocols rip group group-name],
[edit routing-instances routing-instance-name protocols rip group group-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure neighbor-specific RIP parameters, thereby overriding the defaults set for the
routing device.
—Name of an interface over which a routing device communicates to its
neighbor-name
neighbors.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Chapter 73: Configuration Statements for Layer 3 Protocols
1627