Show Pim Neighbors - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show pim neighbors

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 284: show pim neighbors Output Fields
Field Name Field Description
Instance Name of the routing instance.
Interface through which the neighbor is reachable.
Interface
Address of the neighboring PIM routing device.
Neighbor addr
2224
show pim neighbors
<brief | detail>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
show pim neighbors
<brief | detail>
<inet | inet6>
<instance instance-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about Protocol Independent Multicast (PIM) neighbors.
—(Same as ) Display standard information about PIM neighbors for all supported
none brief
family addresses for all routing instances.
—(Optional) Display the specified level of output.
brief | detail
—(Optional) Display information about PIM neighbors for IPv4 or IPv6 family
inet | inet6
addresses, respectively.
—(Optional) Display information about neighbors for the specified
instance instance-name
PIM-enabled routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show pim neighbors on page 2226
show pim neighbors brief on page 2226
show pim neighbors instance on page 2226
show pim neighbors detail on page 2226
show pim neighbors detail (with BFD) on page 2226
Table 284 on page 2224 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show pim neighbors command.
Level of Output
All levels
All levels
All levels