Dell PowerConnect J-EX4200-24T Software Manual page 1574

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Required Privilege
Level
Related
Documentation
1502
minimum-interval milliseconds
routing device transmits a hello packet and then expects to receive a reply from the
neighbor with which it has established a BFD session.
Range: 1 through 255,000 milliseconds
minimum-receive-interval milliseconds
the local routing device expects to receive a reply from a neighbor with which it has
established a BFD session.
Range: 1 through 255,000 milliseconds
multiplier number —Configure the number of hello packets not received by a neighbor
that causes the originating interface to be declared down.
Range: 1 through 255
Default: 3
no-adaptation —Configure BFD sessions not to adapt to changing network conditions.
We recommend that you not disable BFD adaptation unless it is preferable not to
have BFD adaptation enabled in your network.
transmit-interval threshold milliseconds
transmit interval adapts to a value greater than the threshold, a single trap and a
single system log message are sent. The interval threshold must be greater than the
minimum transmit interval.
Range: 0 through 4,294,967,295 (2
transmit-interval minimum-interval milliseconds
which the local routing device transmits hello packets to a neighbor.
Range: 1 through 255,000
version —Specify the BFD version to detect.
Range: (BFD version 1), or
Default:
automatic
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring BFD for RIP
Configuring BFD Authentication for RIP
—Configure the minimum intervals at which the local
—Configure only the minimum interval at which
—Configure a threshold. When the BFD session
32
– 1)
—Configure only a minimum interval at
automatic (autodetect the version)