Show Route Extensive - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show route extensive

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 246: show route extensive Output Fields
Field Name Field Description
routing-table-name Name of the routing table (for example,
number destinations Number of destinations for which there are routes in the routing table.
number routes Number of routes in the routing table and total number of routes in the following states:
1946
show route extensive
<destination-prefix>
<logical-system (all | logical-system-name)>
show route extensive
<destination-prefix>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display extensive information about the active entries in the routing tables.
—Display all active entries in the routing table.
none
—(Optional) Display active entries for the specified address or range of
destination-prefix
addresses.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route extensive on page 1951
show route extensive (Access Route) on page 1957
show route extensive (Route Reflector) on page 1957
Table 246 on page 1946 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
(routes that are active).
active
(routes that are in the pending state before being declared inactive).
holddown
hidden (routes that are not used because of a routing policy).
—(Optional) Perform this operation on all logical
show route extensive
inet.0 ).
command.