Dell PowerConnect J-EX4200-24T Software Manual page 1512

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 193: RIP Routing Configuration Summary
Field
General tab
Routing instance name
Preference
Metric Out
Update interval
Route timeout
Policies tab
Import Policy
1440
Select Configure > Routing
1.
NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select
Commit Options to Commit Configuration Changes (J-Web Procedure)"
on page 334 for details about all commit options.
Click one:
2.
—Configures a RIP instance. Enter information into the RIP Configuration page
Add
as described in Table 193 on page 1440.
—Modifies an existing RIP instance. Enter information into the configuration
Edit
page for RIP as described in Table 193 on page 1440.
Delete —Deletes an existing RIP instance.
To modify RIP global settings, click Edit. Enter information in the configuration as
4.
described in Table 194 on page 1441.
Function
Specifies a name for the routing instance.
Specifies the preference of external routes
learned by RIP as compared to those learned
from other routing protocols.
Specifies the metric value to add to routes
transmitted to the neighbor.
Specifies an update time interval to periodically
send out routes learned by RIP to neighbors.
Specifies the route timeout interval for RIP.
Applies one or more policies to routes being
imported into the local routing device from the
neighbors.
> RIP .
Commit Options
Your Action
Type or select and edit the name.
Type or select and edit the value.
Type or select and edit the value.
Type or select and edit the value.
Type or select and edit the value.
Click to add an import policy.
Add
Click
Move up
selected policy up or down the list of policies.
Click
Remove
> Commit . See "Using the
or to move the
Move down
to remove an import policy.