Dell PowerConnect J-EX4200-24T Software Manual page 2073

J series; j-ex series

Table of Contents

Table 250: show route receive-protocol Output Fields (continued)

Field Description

number routes

Number of routes in the routing table and total number of routes in the following

Destination prefix.

Multiple exit discriminator value included in the route.

Destination prefix. The

destination-prefix

(entry, announced)

destination.

Route Distinguisher

64-bit prefix added to IP subnets to make them unique.

Label-Base, range

First label in a block of labels and label block size. A remote PE routing device

uses this first label when sending traffic toward the advertising PE routing device.

Virtual private network (VPN) label. Packets are sent between CE and PE routing

devices by advertising VPN labels. VPN labels transit over either a Resource

Reservation Protocol (RSVP) or a Label Distribution Protocol (LDP)

label-switched path (LSP) tunnel.

Next hop to the destination. An angle bracket (>) indicates that the route is the

selected route.

Local preference value included in the route.

(routes in that are pending state before being declared inactive)

(the routes are not used because of a routing policy)

value is the number of routes for this destination,

value is the number of routes being announced for this

Chapter 74: Operational Commands for Layer 3 Protocols

Level of Output

detail extensive

Chapters

Table of Contents