Clear Multicast Bandwidth-Admission - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

clear multicast bandwidth-admission

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
2152
clear multicast bandwidth-admission
<group group-address>
<inet | inet6>
<instance instance-name>
<interface interface-name>
<source source-address>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Reapply IP multicast bandwidth admissions.
none —Reapply multicast bandwidth admissions for all IPv4 forwarding entries in the
master routing instance.
group group-address —(Optional) Reapply multicast bandwidth admissions for the specified
group.
inet —(Optional) Reapply multicast bandwidth admission settings for IPv4 flows.
inet6 —(Optional) Reapply multicast bandwidth admission settings for IPv6 flows.
—(Optional) Reapply multicast bandwidth admission settings for
instance instance-name
the specified instance. If you do not specify an instance, the command applies to
the master routing instance.
interface interface-name —(Optional) Examines the corresponding outbound interface in
the relevant entries and acts as follows:
If the interface is congested, and it was admitted previously, it is removed.
If the interface was rejected previously, the
command enables the interface to be admitted as long as enough bandwidth
exists on the interface.
If you do not specify an interface, issuing the
command readmits any previously rejected interface for the relevant entries as
long as enough bandwidth exists on the interface.
To manually reject previously admitted outbound interfaces, you must specify the
interface.
source source-address —(Optional) Use with the
bandwidth admission settings for the specified (source, group) entry.
clear
show multicast interface on page 2191
clear multicast bandwidth-admission on page 2153
clear multicast bandwidth-admission
clear multicast bandwidth-admission
option to reapply multicast
group