Hello-Authentication-Type - Dell PowerConnect J-EX4200-24T Software Manual

hello-authentication-type

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
hello-authentication-type (md5 | simple);
[edit logical-systems logical-system-name protocols isis interface interface-name level
number],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name level number],
[edit protocols isis interface interface-name level number],
[edit routing-instances routing-instance-name protocols isis interface interface-name level
number]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Enable authentication on an interface for hello packets. If you enable authentication on
hello packets, you must specify a password by including the
statement.
By default, hello authentication is not configured on an interface. However, if IS-IS
authentication is configured, the hello packets are authenticated using the IS-IS
authentication type and password.
—Specifies Message Digest 5 as the packet verification type.
md5
—Specifies simple authentication as the packet verification type.
simple
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
authentication-key on page 1481
authentication-type on page 1485
hello-authentication-key on page 1556
Configuring Levels on IS-IS Interfaces
Chapter 73: Configuration Statements for Layer 3 Protocols
hello-authentication-key
1557