Bfd-Liveness-Detection - Dell PowerConnect J-EX4200-24T Software Manual

bfd-liveness-detection

Syntax
Hierarchy Level
Release Information
Description
Options
bfd-liveness-detection {
authentication {
algorithm algorithm-name;
key-chain key-chain-name;
<loose-check>;
}
detection-time {
threshold milliseconds;
}
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
transmit-interval {
threshold milliseconds;
minimum-interval milliseconds;
}
multiplier number;
no-adaptation;
version (1 | automatic);
}
[edit logical-systems logical-system-name protocols rip group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip group group-name neighbor neighbor-name]
[edit protocols rip group group-name],
[edit routing-instances routing-instance-name protocols rip group group-name neighbor
neighbor-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure bidirectional failure detection timers and authentication.
authentication algorithm algorithm-name
the specified BFD session:
meticulous-keyed-md5
authentication key-chain key-chain-name
BFD session using the name of the security keychain. The name you specify must
match one of the keychains configured in the
statement at the [edit security]
authentication loose-check
BFD session. Use only for transitional periods when authentication may not be
configured at both ends of the BFD session.
detection-time threshold milliseconds
detection time adapts to a value equal to or greater than the threshold, a single trap
and a single system log message are sent.
Chapter 73: Configuration Statements for Layer 3 Protocols
—Configure the algorithm used to authenticate
,
simple-password keyed-md5
, or
meticulous-keyed-sha-1
—Associate a security key with the specified
authentication-key-chains key-chain
hierarchy level.
—(Optional) Configure loose authentication checking on the
—Configure a threshold. When the BFD session
, ,
keyed-sha-1
.
1501