Show Pim Interfaces - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show pim interfaces

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 282: show pim interfaces Output Fields
Field Name Field Description
Name of the routing instance.
Instance
Interface name.
Name
State of the interface. The state also is displayed in the
State
2216
show pim interfaces
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
show pim interfaces
<inet | inet6>
<instance instance-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about the interfaces on which Protocol Independent Multicast (PIM)
is configured.
none —Display interface information for all family addresses for all routing instances.
—(Optional) Display interface information for IPv4 or IPv6 family addresses,
inet | inet6
respectively.
instance instance-name —(Optional) Display information about interfaces for a specific
PIM-enabled routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show pim interfaces on page 2217
show pim interfaces inet on page 2218
show pim interfaces inet6 on page 2218
Table 282 on page 2216 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show pim interfaces
command.
show interfaces
command.