Dell PowerConnect J-EX4200-24T Software Manual page 2351

Table 290: Components of the Guest VLAN Topology
Property
Switch hardware
VLAN names and tag IDs
One RADIUS server
Configuration of a Guest VLAN That Includes 802.1X Authentication
CLI Quick
Configuration
Step-by-Step
Procedure
Results
Settings
J-EX4200 switch, 24 Gigabit Ethernet interfaces: 8 PoE interfaces (
ge-0/0/7 ) and 16 non-PoE interfaces (
sales , tag 100
, tag
support 200
, tag
guest-vlan
Backend database connected to the switch through interface
In this example, access interface
room. Configure this access interface to provide LAN connectivity to visitors in the
conference room who are not authenticated by the corporate VLAN.
To create a guest VLAN and configure 802.1X authentication, perform these tasks:
To quickly configure a guest VLAN, with 802.1X authentication, copy the following
commands and paste them into the switch terminal window:
[edit]
set vlans guest-vlan vlan-id 300
set protocols dot1x authenticator interface all guest-vlan guest-vlan
To configure a guest VLAN that includes 802.1X authentication on a J-EX Series switch:
Configure the VLAN ID for the guest VLAN:
1.
[edit]
user@switch# set vlans guest-vlan vlan-id 300
Configure the guest VLAN under
2.
[edit]
user@switch# set protocols dot1x authenticator interface all guest-vlan guest-vlan
Check the results of the configuration:
user@switch> show configuration
protocols {
dot1x {
authenticator {
interface {
all {
guest-vlan {
guest-vlan;
}
}
}
}
}
Chapter 82: Examples: Access Control Configuration
ge-0/0/8
300
ge-0/0/1 provides LAN connectivity in the conference
protocols:
dot1x
through
ge-0/0/0
through ge-0/0/23 )
ge-0/0/10
2279