Infinity - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

infinity

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
install
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2104
infinity [ policy-names ];
[edit logical-systems logical-system-name protocols pim spt-threshold],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim spt-threshold],
[edit protocols pim spt-threshold],
[edit routing-instances routing-instance-name protocols pim spt-threshold]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Apply one or more policies to set the SPT threshold to infinity for a source-group address
pair. Use the statement to prevent the last-hop routing device from transitioning
infinity
from the RPT rooted at the RP to an SPT rooted at the source for that source-group
address pair.
—Name of one or more policies.
policy-names
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the PIM SPT Threshold Policy
install;
[edit protocols igmp-snooping vlan vlan-id | vlan-number data-forwarding receiver]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Install forwarding entries in the multicast receiver VLAN. By default, only the multicast
VLAN (MVLAN) installs forwarding entries for MVLAN groups.
Disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 48
Example: Configuring Multicast VLAN Registration on J-EX Series Switches on page 2058
Configuring Multicast VLAN Registration (CLI Procedure) on page 2068