Dell PowerConnect J-EX4200-24T Software Manual page 1504

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 189: BGP Routing Configuration Summary
Field Function
General tab
Group Type Specifies whether the group is an internal
BGP (IBGP) group or an external BGP
(EBGP) group.
Group Name Specifies the name for the group.
ASN Sets the unique numeric identifier of the
AS in which the routing device is configured.
Preference Specifies the degree of preference for an
external route. The route with the highest
local preference value is preferred.
Cluster Id Specifies the cluster identifier to be used
by the route reflector cluster in an internal
BGP group.
Description Specifies the text description of the global,
group, or neighbor configuration.
Damping Specifies whether route flap damping is
enabled or not.
Advertise Inactive Specifies whether BGP advertises the best
Routes route even if the routing table did not select
it to be an active route.
1432
Click one:
2.
—Adds a BGP group. Enter information into the configuration page as described
Add
in Table 189 on page 1432.
Edit —Modifies an existing BGP group. Enter information into the configuration page
as described in Table 189 on page 1432.
Delete —Deletes an existing BGP group.
—Disables BGP configuration.
Disable
To modify BGP global settings, click
3.
information as described in Table 190 on page 1434.
in the Global Information section. Enter
Edit
Your Action
Select the option: or
Internal
Type a new name or select and edit the name.
Type the routing device's 32-bit AS number, in dotted decimal
notation.
If you enter an integer, the value is converted to a 32-bit
equivalent. For example, if you enter
the AS is 0.0.0.3 .
Type or select and edit the value.
Type or select and edit the IPv6 or IPv4 address to be used
as the identifier.
Type or select and edit the description.
To enable route flap damping, select the check box.
To disable route flap damping do not select the check box.
To enable advertising inactive routes, select the check box.
To disable advertising inactive routes, do not select the check
box.
.
External
, the value assigned to
3