Traffic-Engineering (Ospf) - Dell PowerConnect J-EX4200-24T Software Manual

traffic-engineering (OSPF)

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
traffic-engineering {
<advertise-unnumbered-interfaces>;
<credibility-protocol-preference>;
ignore-lsp-metrics;
multicast-rpf-routes;
no-topology;
shortcuts {
lsp-metric-into-summary;
}
}
[edit logical-systems logical-system-name protocols (ospf | ospf3)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)],
[edit protocols (ospf | ospf3)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Enable the OSPF traffic engineering features.
Traffic engineering support is disabled.
advertise-unnumbered-interfaces
identifier in the link-local traffic-engineering link-state advertisement. You do not
need to include this statement if RSVP is able to signal unnumbered interfaces as
defined in RFC 3477.
credibility-protocol-preference
preference value for OSPF routes to calculate the traffic engineering database
credibility value used to select IGP routes. Use this statement to override the default
behavior of having the traffic engineering database prefer IS-IS routes even if OSPF
routes are configured a with a lower, that is, preferred, preference value.
—(Optional) (OSPFv2 only) Install routes for multicast RPF checks
multicast-rpf-routes
into the inet.2 routing table.
—(Optional) (OSPFv2 only) Disable the dissemination of the link-state
no-topology
topology information.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling OSPF Traffic Engineering Support
Chapter 73: Configuration Statements for Layer 3 Protocols
—(Optional) (OSPFv2 only) Include the link-local
—(Optional) (OSPFv2 only) Specify to use the configured
1735