Show Multicast Mrinfo - Dell PowerConnect J-EX4200-24T Software Manual

show multicast mrinfo

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 272: show multicast mrinfo Output Fields
Field Name Field Description
Query address, hostname (DNS name or IP address of the source address), and multicast protocol
source-address
version or the software version of another vendor.
Queried router interface address and directly attached neighbor interface address, respectively.
ip-address-1--->ip-address-2
or Name or IP address of neighbor.
(name ip-address)
[metric/threshold/type/ Neighbor's multicast profile:
flags]
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
show multicast mrinfo
<host>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display configuration information about IP multicast networks, including neighboring
multicast router addresses.
none —Display configuration information about all multicast networks.
host —(Optional) Display configuration information about a particular host. Replace host
with a hostname or IP address.
view
show multicast mrinfo on page 2194
Table 272 on page 2193 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
metric —Always has a value of
—Multicast threshold time-to-live (TTL). The range of values is
threshold
—Multicast connection type:
type
flags —Flags for this route:
—Queried router is the designated router for the neighboring session.
querier
—Link is a leaf in the multicast network.
leaf
—Link status indicator.
down
1 , because mrinfo queries the directly connected interfaces of a device.
or .
pim tunnel
command.
show multicast mrinfo
through .
0 255
2193