Priority - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Required Privilege
Level
Related
Documentation

priority

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1668
idle-timeout (forever | timeout-in-minutes)
statement, the session is torn down for a specified amount of time, or forever. If you
specify a period of time, the session is allowed to reestablish after this timeout period.
If you specify forever , the session is reestablished only after you intervene with a
bgp neighbor command.
Range: 1 through 2400
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
accepted-prefix-limit
Enabling Multiprotocol BGP
priority number;
[edit interfaces interface-name unit logical-unit-number family inet address address vrrp-group
group-id],
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure a switch's priority for becoming the master default routing platform. The routing
platform with the highest priority within the group becomes the master.
—Routing platform's priority for being elected to be the master router in the VRRP
number
group. A larger value indicates a higher priority for being elected.
Range: 1 through 255
Default: 100 (for backup routers)
NOTE: Priority 255 cannot be assigned to routed VLAN interfaces (RVIs).
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring VRRP for IPv6 (CLI Procedure) on page 1452
—(Optional) If you include the idle-timeout
clear