Hello-Interval - Dell PowerConnect J-EX4200-24T Software Manual

hello-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
hello-interval seconds;
[edit logical-systems logical-system-name protocols ospf area area-id peer-interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id virtual-link],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id virtual-link],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface
interface-name],
[edit protocols ospf area area-id peer-interface interface-name],
[edit protocols (ospf | ospf3) area area-id interface interface-name],
[edit protocols (ospf | ospf3) area area-id virtual-link],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id
interface interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id
virtual-link],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Specify how often the routing device sends hello packets out the interface. The hello
interval must be the same for all routing devices on a shared logical IP network.
—Time between hello packets, in seconds.
seconds
Range: 1 through 255 seconds
Default: 10 seconds; 120 seconds (nonbroadcast networks)
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
dead-interval on page 1518
Configuring OSPF Timers
Chapter 73: Configuration Statements for Layer 3 Protocols
1559