Allow - Dell PowerConnect J-EX4200-24T Software Manual

J series; j-ex series

Table of Contents

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

allow

Hierarchy Level

Release Information

Required Privilege

Documentation

allow (all | [ network/mask-length ]);

[edit logical-systems logical-system-name protocols bgp group group-name],

[edit logical-systems logical-system-name routing-instances routing-instance-name protocols

bgp group group-name],

[edit protocols bgp group group-name],

[edit routing-instances routing-instance-name protocols bgp group group-name]

Statement introduced before Junos OS Release 10.2 for J-EX Series switches.

Implicitly configure BGP peers, allowing peer connections from any of the specified

networks or hosts. To configure multiple BGP peers, configure one or more networks and

hosts within a single

—Allow all addresses, which is equivalent to

—IPv6 or IPv4 network number of a single address or a range of

network/mask-length

allowable addresses for BGP peers, followed by the number of significant bits in the

subnet mask.

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.

neighbor on page 1624

Minimum BGP Configuration

Configuring BGP Groups and Peers

statement or include multiple

Table of Contents