Authentication - Dell PowerConnect J-EX4200-24T Software Manual

Purpose
Action
Meaning
Related
Documentation
Example: Configuring VoIP on a J-EX Series Switch Without Including 802.1X

Authentication

Verifying the VLAN Association with the Interface
Display the interface state and VLAN membership.
user@switch> show ethernet-switching interfaces
Ethernet-switching table: 0 entries, 0 learned
user@switch> show ethernet-switching interfaces
Interface State VLAN members
ge-0/0/0.0 down default
ge-0/0/1.0 down employee-vlan
ge-0/0/5.0 down employee-vlan
ge-0/0/3.0 down employee-vlan
ge-0/0/8.0 down employee-vlan
ge-0/0/10.0 down default
ge-0/0/11.0 down employee-vlan
ge-0/0/23.0 down default
ge-0/0/2.0 up voice-vlan
data-vlan
The field shows that the
VLAN members
VLAN and voice-vlan VLAN. The
Example: Connecting a RADIUS Server for 802.1X to a J-EX Series Switch on page 2267
Example: Setting Up 802.1X for Single Supplicant or Multiple Supplicant Configurations
on a J-EX Series Switch on page 2290
Defining CoS Forwarding Classes (CLI Procedure) on page 2918
Defining CoS Forwarding Classes (J-Web Procedure) on page 2918
Configuring LLDP-MED (CLI Procedure) on page 2346
You can configure voice over IP (VoIP) on a J-EX Series switch to support IP telephones.
To configure VoIP on a J-EX Series switch to support an IP phone that does not support
802.1X authentication, you must either add the MAC address of the phone to the static
MAC bypass list or enable MAC RADIUS authentication on the switch.
This example describes how to configure VoIP on a J-EX Series switch without 802.1X
authentication using static MAC bypass of authentication:
Requirements on page 2310
Overview on page 2310
Configuration on page 2310
Verification on page 2313
Chapter 82: Examples: Access Control Configuration
Blocking
unblocked
unblocked
unblocked
unblocked
unblocked
unblocked
unblocked
unblocked
unblocked
unblocked
interface supports both the
ge-0/0/2.0
State field shows that the interface is up.
data-vlan
2309