Dell PowerConnect J-EX4200-24T Software Manual page 2394

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Results
Verification
Purpose
2322
[edit firewall family ethernet-switching]
user@switch# set filter filter1 term term1 from destination-address 192.0.2.16/28
user@switch# set filter filter1 term term1 then count counter1
user@switch# set filter filter1 term term2 then policer p1
Check the results of the configuration:
user@switch> show configuration
firewall {
family ethernet-switching {
filter filter1 {
term term1 {
from {
destination-address {
192.0.2.16/28;
}
}
then count counter1;
term term2 {
from {
destination-address {
192.0.2.16/28;
}
}
then policer p1;
}
}
}
policer p1 {
if-exceeding {
bandwidth-limit 1m;
burst-size-limit 1k;
}
then discard;
}
}
protocols {
dot1x {
authenticator
interface ge-0/0/2 {
supplicant multiple;
}
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying Firewall Filters on Interfaces with Multiple Supplicants on page 2322
Verifying Firewall Filters on Interfaces with Multiple Supplicants
Verify that firewall filters are functioning on the interface with multiple supplicants.