Dell PowerConnect J-EX4200-24T Software Manual page 2310

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
2238
Table 287: show pim statistics Output Fields (continued)
Field Name
Rx Unknown Reg Stop
Rx Join/Prune no state
Rx Join/Prune on upstream
if
Rx Join/Prune messages
dropped
Rx sparse join for dense
group
Rx Graft/Graft Ack no state
Rx Graft on upstream if
Rx CRP not BSR
Rx BSR when BSR
Rx BSR not RPF if
Rx unknown hello opt
Rx data no state
Rx RP no state
Rx aggregate
Rx malformed packet
No RP
No register encap if
Field Description
Number of register stop messages with an unknown type.
Number of join and prune messages received for which the router
has no state.
Number of join and prune messages received on the interface used
to reach the upstream router, toward the RP.
Number of join and prune messages received and dropped.
Number of PIM sparse mode join messages received for a group
that is configured for dense mode.
Number of graft and graft acknowledgement messages received
for which the router has no state.
Number of graft messages received on the interface used to reach
the upstream router, toward the RP.
Number of BSR messages received in which the PIM message type
is Candidate-RP-Advertisement, not Bootstrap.
Number of BSR messages received in which the PIM message type
is Bootstrap.
Number of BSR messages received on an interface that is not the
RPF interface.
Number of PIM hello packets received with options that Junos OS
does not support.
Number of PIM control packets received for which the router has
no state for the data type.
Number of PIM control packets received for which the router has
no state for the RP.
Number of PIM aggregate MDT packets received.
Number of PIM control packets received with a malformed IP unicast
or multicast address family.
Number of PIM control packets received with no RP address.
Number of PIM register packets received when the first-hop router
does not have an encapsulation interface.