Monitoring Routing Information - Dell PowerConnect J-EX4200-24T Software Manual

Table 200: Summary of Key RIP Routing Output Fields (continued)
Field Values
RIP Neighbors
Neighbor Name of the RIP neighbor.
State State of the RIP connection:
Source Address Local source address.
Destination Address Destination address.
Send Mode The mode of sending RIP messages.
Receive Mode The mode in which messages are received.
In Metric Value of the incoming metric configured for the RIP
neighbor.
Related
Documentation

Monitoring Routing Information

Purpose
Action
Meaning
Up or
Configuring a RIP Network (J-Web Procedure) on page 1439
Layer 3 Protocols Supported on J-EX Series Switches on page 13
Use the monitoring functionality to view the
To view the routing tables in the J-Web interface, select Monitor > Routing > Route
Information. Apply a filter or a combination of filters to view messages. You can use
filters to display relevant events.
To view the routing table in the CLI, enter the following commands in the CLI interface:
show route terse
show route detail
Table 201 on page 1462 describes the different filters, their functions, and the associated
actions.
Table 202 on page 1462 summarizes key output fields in the routing information display.
Chapter 72: Verifying Layer 3 Protocols Configuration
Additional Information
This value is the name of the interface on which
RIP is enabled. Click the name to see the details for
this neighbor.
Dn (Down).
This value is the configured address of the interface
on which RIP is enabled.
This value is the configured address of the
immediate RIP adjacency.
inet.0 routing table on the routing device.
1461