Dell PowerConnect J-EX4200-24T Software Manual page 2241

Required Privilege
Level
List of Sample Output
Output Fields
mtrace to-gateway mtrace to-gateway
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
response response —(Optional) Send trace response to a host or multicast address.
routing-instance routing-instance-name
—(Optional) IP time-to-live value. You can specify a number between
ttl ttl
Local queries to the multicast group use TTL
unicast-response —(Optional) Always request the response using unicast.
wait-time wait-time —(Optional) Number of seconds to wait for a response. The default
value is 3 .
view
mtrace to-gateway on page 2169
Table 262 on page 2169 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 262: mtrace to-gateway Output Fields
Field Name
Mtrace from
to
via group
Querying full reverse path
number-of-hops
router-name
address
protocol
Round trip time
total ttl of
user@host> mtrace to-gateway gateway 192.1.3.2 group 225.1.1.1 interface 192.1.1.73 brief
Mrace from 192.1.1.73 to 192.1.1.2 via group 225.1.1.1
Querying full reverse path... * *
0 routerA.lab.mycompany.net (192.1.1.2)
-1 routerA.lab.mycompany.net (192.1.1.2)
-2 routerB.lab.mycompany.net (192.1.2.2)
—(Optional) Trace a particular routing instance.
. Otherwise, the default value is
1
Field Description
IP address of the receiver.
IP address of the source.
IP address of the multicast group (if any).
Indicates the full reverse path query has begun.
Number of hops from the source to the named router or switch.
Name of the router or switch for this hop.
Address of the router or switch for this hop.
Protocol used (for example, PIM).
Average round-trip time, in milliseconds (ms).
Time-to-live (TTL) threshold.
PIM
PIM
and
0
mtrace to-gateway command.
thresh^ 1
thresh^ 1
.
225
.
127
2169