Traceoptions (Rip) - Dell PowerConnect J-EX4200-24T Software Manual

traceoptions (RIP)

Syntax
Hierarchy Level
Release Information
Description
Default
Options
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
}
[edit logical-systems logical-system-name protocols rip],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip],
[edit protocols rip],
[edit routing-instances routing-instance-name protocols rip]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Set RIP protocol-level tracing options.
The default RIP protocol-level trace options are inherited from the global
statement.
—(Optional) Disable the tracing operation. One use of this option is to disable a
disable
single operation when you have defined a broad group of tracing operations, such
as all .
—Name of the file to receive the output of the tracing operation. Enclose the
file filename
name in quotation marks. We recommend that you place RIP tracing output in the
file .
/var/log/rip-log
files number —(Optional) Maximum number of trace files. When a trace file named
trace-file reaches its maximum size, it is renamed
so on, until the maximum number of trace files is reached. Then, the oldest trace file
is overwritten.
If you specify a maximum number of files, you must also specify a maximum file size
with the size option.
Range: 2 through 1000 files
Default: 10 files
—Tracing operation to perform. To specify more than one tracing operation, include
flag
multiple statements.
flag
RIP Tracing Options
auth —RIP authentication
—RIP error packets
error
—RIP route expiration processing
expiration
—RIP hold-down processing
holddown
—Nonstop routing synchronization events
nsr-synchronization
packets —All RIP packets
Chapter 73: Configuration Statements for Layer 3 Protocols
trace-file.0
traceoptions
, then trace-file.1 , and
1727