Dell PowerConnect J-EX4200-24T Software Manual page 2302

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 285: show pim rps Output Fields (continued)
Field Name Field Description
Register State for Current register state for each group:
RP
Group
Source
depending on whether this router is a designated router facing an RP router,
or is the local RP, respectively:
First Hop
(the source address in the IP header).
RP Address
address in the IP header).
State
On the designated router:
Send
Probe
5 seconds, the designated router resumes sending Register messages.
Suppress
waiting for the timer to resume before changing to
On the RP:
Receive
Anycast-PIM rpset If anycast RP is configured, the addresses of the RPs in the set.
If anycast RP is configured, the local address used by the RP.
Anycast-PIM local
address used
Anycast-PIM If anycast RP is configured, the current register state for each group:
Register State
Group
Source
depending on whether this routing device is a designated router facing an RP
router, or is the local RP, respectively.
Origin
DIRECT
MSDP
DR
show pim rps show pim rps
show pim rps brief
show pim rps instance
2230
—Multicast group address.
—Multicast source address for which the PIM register is sent or received,
—PIM-designated routing device that sent the Register message
—RP to which the Register message was sent (the destination
:
—Sending Register messages.
—Sent a null register. If a Register-Stop message does not arrive in
—Received a Register-Stop message. The designated router is
—Receiving Register messages.
—Multicast group address.
—Multicast source address for which the PIM register is sent or received,
—How the information was obtained:
—From a local attachment
—From the Multicast Source Discovery Protocol (MSDP)
—From the designated router
user@host> show pim rps
Instance: PIM.master
Address family INET
RP address
10.255.14.144
Address family INET6
The output for the
show pim rps brief
command. For sample output, see show pim rps on page 2230.
user@host> show pim rps instance VPN-A
Probe state.
Type Holdtime Timeout Groups Group prefixes
static 0
command is identical to that for the
Level of Output
extensive
extensive
extensive
extensive
None 1 224.0.0.0/4
show pim rps