Table of Contents
Advertisement
Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
show pim rps
Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 285: show pim rps Output Fields
Field Name
Field Description
Name of the routing instance.
Instance
2228
show pim rps
<brief | detail | extensive>
<group-address>
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
show pim rps
<brief | detail | extensive>
<group-address>
<inet | inet6>
<instance instance-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about Protocol Independent Multicast (PIM) rendezvous points
(RPs).
none
—Display standard information about PIM RPs for all groups and family addresses
for all routing instances.
—(Optional) Display the specified level of output.
brief | detail | extensive
group-address
—(Optional) Display the RPs for a particular group. If you specify a group
address, the output lists the routing device that is the RP for that group.
inet | inet6
—(Optional) Display information for IPv4 or IPv6 family addresses, respectively.
instance instance-name
—(Optional) Display information about RPs for a specific
PIM-enabled routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show pim rps on page 2230
show pim rps brief on page 2230
show pim rps instance on page 2230
show pim rps extensive on page 2231
show pim rps extensive (PIM Anycast RP in Use) on page 2231
Table 285 on page 2228 describes the output fields for the
fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show pim rps
command. Output
Level of Output
All levels
Advertisement
Chapters
Table of Contents
Troubleshooting
