Dell PowerConnect J-EX4200-24T Software Manual page 2414

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
2342
To deny access based on a destination IP address:
[root@freeradius]# cd /usr/local/etc/raddb
vi users
For each relevant user, add the
Juniper-Switching-Filter = "match destination-ip 192.168.1.0/31 action deny"
To set the packet loss priority (PLP) to
and the IP protocol:
[root@freeradius]# cd /usr/local/etc/raddb
vi users
For each relevant user, add the
Juniper-Switching-Filter = "match destination-mac 00:04:0f:fd:ac:fe, ip-protocol 2,
forwarding-class high, action loss-priority high"
NOTE: For the
class must be configured on the switch. If it is not configured on the
switch, this option is ignored. You must specify both the forwarding
class and the packet loss priority.
Stop and restart the RADIUS process to activate the configuration.
3.
Juniper-Switching-Filter
based on a destination MAC address
high
Juniper-Switching-Filter
option to be applied, the forwarding
forwarding-class
attribute:
attribute: