Dell PowerConnect J-EX4200-24T Software Manual page 1569

Range: 1 through 255,000
minimum-receive-interval milliseconds
Range: 1 through 255,000
multiplier number
Range: 1 through 255
Default: 3
no-adaptation
transmit-interval threshold milliseconds
Range: 0 through 4,294,967,295 (2
transmit-interval minimum-interval milliseconds
Range: 1 through 255,000
version
Range:
Default:
The remaining statements are explained separately.
Required Privilege routing—To view this statement in the configuration.
Level routing-control—To add this statement to the configuration.
Related Configuring BFD for IS-IS
Documentation
Configuring BFD Authentication for IS-IS
the local routing device expects to receive a reply from a neighbor with which it has
established a BFD session.
—Configure the number of hello packets not received by a neighbor
that causes the originating interface to be declared down.
—Specify that BFD sessions not adapt to changing network conditions.
We recommend that you not disable BFD adaptation unless it is preferable not to
have BFD adaptation enabled in your network.
transmit interval adapts to a value greater than the threshold, a single trap and a
single system log message are sent. The interval threshold must be greater than the
minimum transmit interval.
at which the routing device sends hello packets to a neighbor with which it has
established a BFD session.
—Specify the BFD version to detect.
(BFD version 1), or
1 automatic
automatic
Chapter 73: Configuration Statements for Layer 3 Protocols
—Configure only the minimum interval at which
—Configure a threshold. When the BFD session
32
– 1)
—Configure only the minimum interval
(autodetection)
1497