Show Bgp Neighbor - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show bgp neighbor

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
1812
show bgp neighbor
<instance instance-name>
<logical-system (all | logical-system-name)>
<neighbor-address>
<orf (detail | neighbor-address)
show bgp neighbor
<instance instance-name>
<neighbor-address>
<orf (neighbor-address | detail)
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about Border Gateway Protocol (BGP) peers.
—Display information about all BGP peers.
none
—(Optional) Display information about BGP peers for only the
instance instance-name
specified routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display information for only the BGP peer at the specified
neighbor-address
IP address.
orf (detail | neighbor-address)
for all BGP peers or only for the BGP peer at the specified IP address. The default is
to display brief output. Use the
For information about the
the Junos OS Routing Protocols Configuration Guide.
view
clear bgp neighbor on page 1756
show bgp neighbor (CLNS) on page 1818
show bgp neighbor (Layer 2 VPN) on page 1819
show bgp neighbor (Layer 3 VPN) on page 1820
show bgp neighbor neighbor-address on page 1821
show bgp neighbor neighbor-address on page 1822
show bgp neighbor orf neighbor-address detail on page 1823
Table 215 on page 1813 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
—(Optional) Display outbound route-filtering information
option to display detailed output.
detail
,
local-address, nlri hold-time,
and statements, see
preference
show bgp neighbor command.