Traceoptions - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

traceoptions

Syntax
Hierarchy Level
Release Information
Description
Default
Options
2134
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable> <match
regex>;
flag flag (detail | disable | receive | send);
}
[edit protocols igmp-snooping]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Define tracing operations for IGMP snooping.
The feature is disabled by default.
traceoptions
—Name of the file to receive the output of the tracing operation. Enclose the
file filename
name within quotation marks. All files are placed in the directory
—(Optional) Maximum number of trace files. When a trace file named
files number
trace-file reaches its maximum size, it is renamed
so on, until the maximum number of trace files is reached (
specify MB, or to specify gigabytes), at which point the oldest trace file is
xg
overwritten. If you specify a maximum number of files, you also must specify a
maximum file size with the
Range: 2 through 1000
Default: 3 files
—Tracing operation to perform. To specify more than one tracing operation,
flag flag
include multiple flag statements. You can include the following flags:
—All tracing operations.
all
—Trace general IGMP snooping protocol events.
general
—Trace leave group messages (IGMPv2 only).
leave
normal —Trace normal IGMP snooping protocol events.
packets —Trace all IGMP packets.
—Trace policy processing.
policy
—Trace IGMP membership query messages.
query
—Trace membership report messages.
report
—Trace routing information.
route
state —Trace IGMP state transitions.
task —Trace routing protocol task processing.
—Trace routing protocol timer processing.
timer
trace-file.0
option.
size
/var/log .
, then trace-file.1 , and
xk to specify KB, xm to