Show Spanning-Tree Interface - Dell PowerConnect J-EX4200-24T Software Manual

show spanning-tree interface

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show spanning-tree interface
<brief | detail>
<interface-name interface-name>
<msti msti-id>
<vlan-id vlan-id>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display the configured or calculated interface-level spanning-tree protocol (can be either
STP, RSTP, or MSTP) parameters. In
administratively disabled or do not have a physical link.
—(Optional) Display brief STP interface information.
none
brief | detail —(Optional) Display the specified level of output.
interface-name interface-name
—(Optional) Display STP bridge information for the specified MSTP instance
msti msti-id
ID or Common and Internal Spanning Tree (CIST). Specify
from 1 through 4094
—(Optional) For MSTP interfaces, display interface information for the
vlan-id vlan-id
specified VLAN. Specify a value from
view
show spanning-tree bridge on page 1398
Example: Configuring Network Regions for VLANs with MSTP on J-EX Series Switches
on page 1297
Understanding STP for J-EX Series Switches on page 1275
Understanding RSTP for J-EX Series Switches on page 1276
Understanding MSTP for J-EX Series Switches on page 1277
Understanding VSTP for J-EX Series Switches on page 1281
show spanning-tree interface on page 1408
show spanning-tree interface brief on page 1409
show spanning-tree interface detail on page 1409
show spanning-tree interface ge-1/0/0 on page 1410
Table 182 on page 1408 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 69: Operational Mode Commands for Spanning-Tree Protocols
mode, will not display interfaces that are
brief
—(Optional) Name of an interface.
for an MSTI.
through
0
show spanning-tree Interface
for CIST. Specify a value
0
.
4094
command.
1407