Dell PowerConnect J-EX4200-24T Software Manual page 1879

J series; j-ex series
Table of Contents

Advertisement

Table 214: show bgp group Output Fields (continued)
Field Name
AS
Local AS
Name
Flags
Export
MED tracks IGP metric update delay
Total peers
Established
Active/Received/Accepted/Damped
ip-addresses
Route Queue Timer
Field Description
AS number of the peer. For internal BGP (IBGP), this number is the
same as
.
Local AS
AS number of the local routing device.
Name of a specific BGP group.
Flags associated with the BGP group. This field is used by Dell
Support (see "Requesting Technical Support" on page lxxi).
Export policies configured for the BGP group with the
statement.
Time interval, in seconds, that updates to multiple exit discriminator
(MED) are delayed. Also displays the time remaining before the
interval is set to expire
Total number of peers in the group.
Number of peers in the group that are in the established state.
Multipurpose field that displays information about BGP peer
sessions. The field's contents depend upon whether a session is
established and whether an established session was established in
the main routing device or in a routing instance.
If a peer is not established, the field shows the state of the peer
session:
,
, or
Active
Connect
If a BGP session is established in the main routing device, the field
shows the number of active, received, accepted, and damped
routes that are received from a neighbor and appear in the
(main) and
(multicast) routing tables. For example,
inet.2
indicate the following:
8/10/10/2 and 2/4/4/0
8 active routes, 10 received routes, 10 accepted routes, and 2
damped routes from a BGP peer appear in the
table.
2 active routes, 4 received routes, 4 accepted routes, and no
damped routes from a BGP peer appear in the
table.
List of peers who are members of the group. The address is followed
by the peer's port number.
Number of seconds until queued routes are sent. If this time has
already elapsed, this field displays the number of seconds by which
the updates are delayed.
Chapter 74: Operational Commands for Layer 3 Protocols
export
.
Idle
routing
inet.0
routing
inet.2
Level of
Output
brief detail
none
brief detail
none
brief detail
none
brief detail
none
brief detail
none
All
brief detail
none
All levels
summary
inet.0
All levels
detail
1807

Advertisement

Table of Contents
loading

Table of Contents