Dell PowerConnect J-EX4200-24T Software Manual page 1781

Options defaults —Specify global static route options. These options only set default attributes
inherited by all newly created static routes. These are treated as global defaults and
apply to all the static routes you configure in the
statement is optional.
static
route destination-prefix
defaults —For the default route to the destination. This is equivalent to specifying an
IP address of
destination-prefix/prefix-length
address, and
next-hop address
interface name, or an ISO network entity title (NET).
—
nsap-prefix
next-hop options
the next hop.
—Do not forward packets addressed to this destination. Instead, drop the
discard
packets, do not send ICMP unreachable messages to the packets' originators, and
install a reject route for this destination into the routing table.
—Reach the next-hop routing device by specifying an ISO NSAP.
iso-net
next-table routing-table-name
—Install a receive route for this destination into the routing table.
receive
reject —Do not forward packets addressed to this destination. Instead, drop the packets,
send ICMP unreachable messages to the packets' originators, and install a reject route
for this destination into the routing table.
static-options —(Optional under
is included with the route when it is installed in the routing table.
You can specify one or more of the following in
explained separately.
(active | passive)
as-path <as-path> <origin (egp | igp | incomplete)> <atomic-aggregate> <aggregator
as-number in-address>
community [ community-ids ]
(install | no-install)
(metric | metric2 | metric3 | metric4) value <type type>
(preference | preference2 | color | color2) preference <type type>
(readvertise | no-readvertise)
Chapter 73: Configuration Statements for Layer 3 Protocols
—Destination of the static route.
0.0.0.0/0 .
— destination-prefix
is the destination prefix length.
prefix-length
—Reach the next-hop routing device by specifying an IP address, an
is the network service access point (NSAP) address for ISO.
nsap-prefix
—Additional information for how to manage forwarding of packets to
—Name of the next routing table to the destination.
route ) Additional information about static routes, which
;
;
;
;
;
statement. This part of the
static
is the network portion of the IP
static-options . Each of the options is
;
;
1709