Dense-Groups - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

dense-groups

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
disable
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
2088
dense-groups {
addresses;
}
[edit logical-systems logical-system-name protocols pim],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim],
[edit protocols pim],
[edit routing-instances routing-instance-name protocols pim]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure which groups are operating in dense mode.
—Address of groups operating in dense mode.
addresses
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring PIM Sparse-Dense Mode Properties
disable {
interface interface-name
}
[edit protocols igmp-snooping vlan vlan-id | vlan-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Disable IGMP snooping on all interfaces in a VLAN or on a specific VLAN interface.
If you do not specify an interface, all interfaces in the given VLAN are disabled.
—Name of the interface.
interface-name
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring IGMP Snooping on J-EX Series Switches on page 2055
Configuring IGMP Snooping (CLI Procedure) on page 2063