Show Multicast Route - Dell PowerConnect J-EX4200-24T Software Manual

show multicast route

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
show multicast route
<brief | detail | extensive>
<active | all | inactive>
<group group>
<inet | inet6>
<instance instance name>
<logical-system (all | logical-system-name)>
<regular-expression>
<source-prefix source-prefix>
show multicast route
<brief | detail | extensive>
<active | all | inactive>
<group group>
<inet | inet6>
<instance instance name>
<regular-expression>
<source-prefix source-prefix>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display the entries in the IP multicast forwarding table. You can display similar information
with the
show route table inet.1
none —Display standard information about all entries in the multicast forwarding table
for all routing instances.
brief | detail | extensive —(Optional) Display the specified level of output.
active | all | inactive —(Optional) Display all active entries, all entries, or all inactive entries,
respectively, in the multicast forwarding table.
group group —(Optional) Display the cache entries for a particular group.
—(Optional) Display multicast forwarding table entries for IPv4 or IPv6 family
inet | inet6
addresses, respectively.
instance instance-name —(Optional) Display entries in the multicast forwarding table for
a specific multicast instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
regular-expression —(Optional) Display information about the multicast forwarding table
entries that match a UNIX-style regular expression.
source-prefix source-prefix
prefix.
command.
—(Optional) Perform this operation on all logical
—(Optional) Display the cache entries for a particular source
2199