Show Pim Statistics - Dell PowerConnect J-EX4200-24T Software Manual

show pim statistics

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
show pim statistics
<inet |inet6)>
<instance instance-name>
<interface interface-name>
<logical-system (all | logical-system-name)>
show pim statistics
<inet |inet6)>
<instance instance-name>
<interface interface-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display Protocol Independent Multicast (PIM) statistics.
—Display PIM statistics.
none
—(Optional) Display IPv4 or IPv6 PIM statistics.
inet | inet6
instance instance-name —(Optional) Display statistics for a specific routing instance
enabled by Protocol Independent Multicast (PIM).
interface interface-name —(Optional) Display statistics about the specified interface.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
clear pim statistics on page 2159
show pim statistics on page 2240
Table 287 on page 2235 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 287: show pim statistics Output Fields
Field Name
PIM statistics
PIM message type
Received
Sent
—(Optional) Perform this operation on all logical
Field Description
PIM statistics for all interfaces or for the specified interface.
Message type for which statistics are displayed.
Number of received statistics.
Number of messages sent of a certain type.
show pim statistics command.
2235