Show Multicast Pim-To-Mld-Proxy - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show multicast pim-to-mld-proxy

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show multicast show multicast
pim-to-mld-proxy pim-to-mld-proxy
2198
show multicast pim-to-mld-proxy
<logical-system (all | logical-system-name)>
show multicast pim-to-mld-proxy
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display configuration information about PIM-to-MLD message translation, also known
as PIM-to-MLD proxy.
—Display configuration information about PIM-to-MLD message translation.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show multicast pim-to-mld-proxy on page 2198
Table 275 on page 2198 describes the output fields for the
command. Output fields are listed in the order in which they appear.
Table 275: show multicast pim-to-mld-proxy Output Fields
Field Name
Proxy state
interface-name
user@host> show multicast pim-to-mld-proxy
Proxy state: enabled
ge-0/5/0.1
ge-0/5/0.2
—(Optional) Perform this operation on all logical
Field Description
State of PIM-to-MLD message translation, also known as
PIM-to-MLD proxy, on the configured upstream interfaces:
or .
disabled
Name of upstream interface (no more than two allowed) on which
PIM-to-MLD message translation is configured.
show multicast pim-to-mld-proxy
enabled