Dell PowerConnect J-EX4200-24T Software Manual page 1505

Table 189: BGP Routing Configuration Summary (continued)
Field Function
Advertise Peer Specifies whether to disable the default
AS Routes behavior of suppressing AS routes.
Neighbors tab
Dynamic Configures a neighbor (peer).
Neighbors
Static Neighbors Configures the system's peers statically.
Policies tab
Import Policy Specifies one or more routing policies to
routes being imported into the routing table
from BGP.
Export Policy Specifies one or more policies to routes
being exported from the routing table into
BGP.
Chapter 71: Configuring Layer 3 Protocols
Your Action
To enable advertising peer AS routes, select the check box.
To disable advertising peer AS routes, do not select the check
box.
Type the IPv4 address of the peer.
To configure a static neighbor:
1. Specify the IP address.
2. Specify the address of the local end of a BGP session.
3. Specify the degree of preference for an external route.
4. Enter a description.
5. Specify the hold-time value to use when negotiating a
connection with the peer.
6. Specify how long a route must be present in the routing
table before it is exported to BGP. Use this time delay to
help bundle routing updates.
7. Select if you do not want to send active open
Passive
messages to the peer.
8. Select the option to compare the AS path of an incoming
advertised route with the AS number of the BGP peer
under the group and replace all occurrences of the peer
AS number in the AS path with its own AS number before
advertising the route to the peer.
9. Specify an import policy and export policy.
10. Click OK .
Click to add an import policy. Select the policy and click
Add
OK .
Click Move up or Move down to move the selected policy up
or down the list of policies.
Select the policy and click
Remove
Click to add an export policy. Select the policy and click
Add
.
OK
Click or to move the selected policy up
Move up Move down
or down the list of policies.
Select the policy and click Remove
.
.
1433