Show Route - Dell PowerConnect J-EX4200-24T Software Manual

show route

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 239: show route Output Fields
Field Name Field Description
Name of the routing table (for example,
routing-table-name
Number of destinations for which there are routes in the routing table.
number destinations
Number of routes in the routing table and total number of routes in the following states:
number routes
show route
<all>
<destination-prefix>
<logical-system (all | logical-system-name)>
<private>
show route
<all>
<destination-prefix>
<private>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display the active entries in the routing tables.
—Display brief information about all active entries in the routing tables.
none
—(Optional) Display information about all routing tables, including private, or internal,
all
routing tables.
—(Optional) Display active entries for the specified address or range of
destination-prefix
addresses.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display information only about all private, or internal, routing tables.
private
view
show route on page 1902
show route destination-prefix on page 1902
Table 239 on page 1899 describes the output fields for the
fields are listed in the approximate order in which they appear.
active (routes that are active).
(routes that are in the pending state before being declared inactive).
holddown
(routes that are not used because of a routing policy).
hidden
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show route
).
inet.0
command. Output
1899