Show Multicast Scope - Dell PowerConnect J-EX4200-24T Software Manual

show multicast scope

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
show multicast scope
<inet | inet6>
<instance instance-name>
<logical-system (all | logical-system-name)>
show multicast scope
<inet | inet6>
<instance instance-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display administratively scoped IP multicast information.
—Display standard information about administratively scoped multicast information
none
for all supported address families in all routing instances.
—(Optional) Display scoped multicast information for IPv4 or IPv6 family
inet | inet6
addresses, respectively.
instance instance-name —(Optional) Display administratively scoped information for a
specific multicast instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show multicast scope on page 2208
show multicast scope inet on page 2208
show multicast scope inet6 on page 2208
Table 278 on page 2207 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 278: show multicast scope Output Fields
Field Name
Scope name
Group Prefix
Interface
Resolve Rejects
—(Optional) Perform this operation on all logical
Field Description
Name of the multicast scope.
Range of multicast groups that are scoped.
Interface that is the boundary of the administrative scope.
Number of kernel resolve rejects.
command.
show multicast scope
2207