Group-Ranges - Dell PowerConnect J-EX4200-24T Software Manual

group-ranges

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
group-ranges {
destination-ip-prefix</prefix-length>;
}
[edit logical-systems logical-system-name protocols pim rp embedded-rp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim rp embedded-rp],
[edit protocols pim rp embedded-rp],
[edit protocols pim rp local family (inet | inet6)],
[edit protocols pim rp static address address],
[edit routing-instances routing-instance-name protocols pim rp embedded-rp],
[edit routing-instances routing-instance-name protocols pim rp local family (inet | inet6)],
[edit routing-instances routing-instance-name protocols pim rp static address address]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the address ranges of the multicast groups for which this routing device can
be an RP.
The routing device is eligible to be the RP for all IPv4 or IPv6 groups (
to ).
FF70::/12 FFF0::/12
—Addresses or address ranges for which this routing device can be an
destination-mask
RP.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Local PIM RPs
Configuring PIM Embedded RP for IPv6
Chapter 79: Configuration Statements for IGMP Snooping and Multicast
224.0.0.0/4 or
2097