Mode - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

mode

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1372
mode mode;
[edit protocols mstp interface (all | interface-name)],
[edit protocols mstp msti msti-id interface interface-name],
[edit protocols rstp interface (all | interface-name)],
[edit protocols stp interface (all | interface-name)],
[edit protocols vstp vlan vlan-id interface (all | interface-name)]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
For Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), VLAN Spanning
Tree Protocol (VSTP), or Multiple Spanning Tree Protocol (MSTP), configure the link
mode to identify point-to-point links.
For a full-duplex link, the default link mode is
default link mode is
shared
mode —Link mode:
—Link is point to point.
point-to-point
—Link is shared media.
shared
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1398
show spanning-tree interface on page 1407
Example: Configuring Network Regions for VLANs with MSTP on J-EX Series Switches
on page 1297
Example: Configuring Faster Convergence and Improving Network Stability with RSTP
on J-EX Series Switches on page 1283
Understanding MSTP for J-EX Series Switches on page 1277
Understanding STP for J-EX Series Switches on page 1275
Understanding VSTP for J-EX Series Switches on page 1281
point-to-point
.
. For a half-duplex link, the