Priority - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

priority

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1670
priority number;
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)] area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)] area area-id interface
interface-name],
[edit protocols (ospf | ospf3) area area-id interface interface-name],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast)] area area-id
interface interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast)] area area-id interface interface-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Specify the routing device's priority for becoming the designated routing devices. The
routing device that has the highest priority value on the logical IP network or subnet
becomes the network's designated router. You must configure at least one routing device
on each logical IP network or subnet to be the designated router. You also should specify
a routing device's priority for becoming the designated router on point-to-point interfaces.
—Routing device's priority for becoming the designated router. A priority value
number
of 0 means that the routing device never becomes the designated router. A value
of 1 means that the routing device has the least chance of becoming a designated
router.
Range: 0 through 255
Default: 128
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
OSPF Designated Router Overview
Configuring the Designated Router Priority for OSPF