Clear Pim Statistics - Dell PowerConnect J-EX4200-24T Software Manual

clear pim statistics

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear pim statistics clear pim statistics
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
clear pim statistics
<inet | inet6>
<instance instance-name>
<interface interface-name>
<logical-system (all | logical-system-name)>
clear pim statistics
<inet | inet6>
<instance instance-name>
<interface interface-name>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Clear Protocol Independent Multicast (PIM) statistics.
—Clear PIM statistics for all family addresses, instances, and interfaces.
none
—(Optional) Clear PIM statistics for IPv4 or IPv6 family addresses, respectively.
inet | inet6
instance instance-name —(Optional) Clear statistics for a specific PIM-enabled routing
instance.
interface interface-name —(Optional) Clear PIM statistics for a specific interface.
logical-system (all | logical-system-name)
systems or on a particular logical system.
The command cannot be used to clear the PIM statistics on a backup
clear pim statistics
Routing Engine when nonstop active routing is enabled.
clear
show pim statistics on page 2235
clear pim statistics on page 2159
See show pim statistics for an explanation of output fields.
The following sample output displays PIM statistics before and after the
command is entered:
user@host> show pim statistics
PIM statistics on all interfaces:
PIM Message type Received
Hello
Register
Register Stop
Join Prune
Bootstrap
—(Optional) Perform this operation on all logical
Sent Rx errors
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
clear pim statistics
2159